Step 1. Unpack boards, float, and pump on a flat, even surface.
Step 2. Lay out float to set up for inflating. A hand pump or an electric pump may be used to inflate.
CAUTION: Do Not Over Inflate! (.35psi)
Step 3. Inflate sections from one side of float to the other - there are 4 inflatable sections in total.
CAUTION: Do Not Over Inflate! (.35psi)
Step 4. Once all sections have been inflated, line up the float boards so that all end sections are together and assembled from left to right.
Strap first board to pontoon with female dovetail ready to accept next board.
Slide male dovetail into already secured female dovetail and secure board with cinch strap. Repeat until all 6 boards are secured.
Step 5. Tie lines on coner D-rings for tethering.
Step 6. Launch the Versifloat™ into the water where convenient.
m
Step 7. Platform will function as a stable floating dock.
Building a floating platform is easy with Versifloat™.
YOU CAN ALSO DOWNLOAD AND PRINT A COPY OF THIS ASSEMBLY GUIDE
BY CLICKING HERE
